What kind of paint should I use for anti-corrosion wood?

2020-09-08 17:49:35 hongling

What kind of paint should I use for anti-corrosion wood?




Water-based paint has stronger penetrating power and can achieve better coloring effect. It is better to paint after the preservative has evaporated. It is recommended that it be six months after the completion of the application.


The existing size and shape should be used as much as possible. Any processing on the impregnated material, such as drilling, fine planing, and cutting, will shorten the service life of the impregnated material. Fujian Anticorrosive Wood Company advocates using hot-dip galvanized nails or screws as connections and installations during construction. When connecting, you should drill holes in advance to avoid cracking, and the glue should be waterproof.




Try to use anti-corrosion wood squares above grade 2 because the moisture content is below 20%, which can effectively avoid cracking and deformation. If it is necessary to use a grade with a moisture content greater than 20%, in the construction site, the stacking of wood should be such that there is a gap of 10-20mm on each layer, and it can be placed on the site for more than 72 hours before construction, and during this period Avoid direct sunlight. This reduces the possibility of wood cracking. For forests with a thickness greater than 38 mm, in order to avoid deformation, a small groove with a width of 10 mm and a depth of 10 mm can be opened on the center line of one side of the wood core.